Identifiants oubliés ? Cliquez ici


Cleaner solvents for sustainable chemistry

Projets De Recherche


Horizon 2020

  • HELIS : Start : 06/01/2015  End : 05/31/2019.
    Reference: H2020-NMP-GV-2014 – project n°666221
    Project title : High energy lithium sulphur cells and batteries
    Target : “HELIS (High energy lithium sulphur cells and batteries) focuses on the development Lithium-Sulphur cells. They will be tested according to automotive specifications.”
    Lithium sulphur batteries (LSB) are viable candidates for commercialization among all post Li-ion battery technologies thanks to their high theoretical energy density and cost effectiveness. Despites many efforts, there are remaining issues that need to be solved and this will provide final direction of LSB technological development. Some of technological aspects, like development of host matrices, interactions of host matrix with polysulphides and interactions between sulphur and electrolyte have been successfully developed within Eurolis project. Open porosity of the cathode, interactions between host matrices and polysulphides and proper solvatation of polysulphides turned to be important for complete utilization of sulphur. Additionally we showed that effective separation between electrodes enables stable cycling with excellent coulombic efficiency. The remaining issues are mainly connected with a stability of lithium anode during cycling, with engineering of complete cell and with questions about LSB cells implementation into commercial products (ageing, safety, recycling, battery packs). Instability of lithium metal in most of conventional electrolytes and formation of dendrites due to uneven distribution of lithium upon the deposition cause several difficulties. Safety problems connected with dendrites and low coulombic efficiency with a constant increase of inner resistance due to electrolyte degradation represent main technological challenges. From this point of view, stabilization of lithium metal will have an impact on safety issues. Stabilized interface layer is important in view of engineering of cathode composite and separator porosity since this is important parameter for electrolyte accommodation and volume expansion adjustment. Finally the mechanism of LSB ageing can determine the practical applicability of LSB in different applications.
    Contact : S. Fantini (

  • ALION : Start : 06/01/2015  End : 05/31/2019.
    Reference: H2020-NMP-2014  - two-stage – project n°646286
    Project title : High Specific Energy Aluminium-ion rechargable decentralised electricity generation sources.
    Target : “ALION (High Specific Energy Aluminium-ion rechargable decentralised electricity generation sources) focuses on the development of Al-ion battery technology for energy storage application in decentralized electricity generation sources.”
    High Specific Energy Aluminium-ion rechargable decentralised electricity generation sources (ALION)
    The overall objective of the ALION project is to develop aluminium-ion battery technology for energy storage application in decentralised electricity generation sources. ALION pursues an integral approach comprising electroactive materials based on “rocking chair” mechanism, robust ionic liquid-based electrolytes as well as novel cell and battery concepts, finally resulting in a technology with much lower cost, improved performance, safety and reliability with respect to current energy storage solutions (e.g. Pumped hydro storage, Compressed air energy storage, Li-ion battery, Redox Flow Battery…).
    The project covers the whole value chain from materials and component manufacturers, battery assembler, until the technology validation in specific electric microgrid system including renewable energy source (i.e. mini wind turbine, photovoltaic system…). Thus, the final objective of this project is to obtain an Al-ion battery module validated in a relevant environment, with a specific energy of 400 W.h/kg, a voltage of 48V and a cycle life of 3000 cycles. The Project is funded by European Commission with GA: 646286, led by LEITAT and involves 13 partners from all across Europe.
    Website :
    Contact : R. Lin (

  • ALISE : Start : 06/01/2015  End : 05/31/2019.
    Reference: H2020-NMP-GV-2014 – project n°666157
    Project title : Advance Lithium Sulphur Batteries for Hybrid Electric Vehicle
    Target : “ALISE (Advance Lithium Sulphur Batteries for Hybrid Electric Vehicle) focuses on the development and commercial scale-up of new materials and on the understanding of the electrochemical processes involved in Lithium Sulphur Batteries”
    ALISE is an European collaboration focused on the development and commercial scale-up of new materials and on the understanding of the electrochemical processes involved in the lithium sulphur technology. It aims to create impact by developing innovative battery technology capable of fulfilling the expected characteristics of European Automotive Industry needs, European Materials Roadmap, Social factors from vehicle consumers and future competitiveness trends and European Companies positioning. The project is focused on achieving 500Wh/Kg in a stable LiS cell.
    The project involves dedicated durability, testing and LCA activities that will make sure the safety and adequate cyclability of battery being developed and available at competitive cost. Initial materials research will be scaled up during the project so that pilot scale quantities of the new materials will be introduced into the novel cell designs thus contributing advancements to the current state of the art.
    The project approach will bring real breakthrough regarding new components, cell integration and architecture associated. New materials will be developed and optimized regarding anode, cathode, electrolyte and separator. Complete panels of specific tools and modeling associated will be developed from the unit cell to the batteries pack. Activities are focused on the elaboration of new materials and processes at TRL4.
    Demonstration of the lithium sulphur technology will be up to battery pack level with validation onboard. Validation of prototype (17kWh) with its corresponding driving range (100km) will be done on circuit. ALISE is more than a linear bottom-up approach from materials to cell. ALISE shows strong resources to achieve a stable unit cell, with a supplementary top-down approach from the final application to the optimization of the unit cell.
    Contact : R. Lin (

Seventh Framework Program (FP7)

  • INFLUENCE : Start : 09/01/2013  End : 08/31/2016.
    Reference: FP7-ENERGY – project n°608621
    Project title : Interfaces of Fluid Electrodes: New Conceptual Explorations
    Target : “The FP7 project Influence aims at improving the fundamental understanding and control of interfaces of a battery type based on Li-ion and Na-ion active materials: semi solid flow batteries (SSFB)”
    Website :
    Contact : S. Fantini ( 

  • MAT4BAT:  Start : 09/01/2013  End : 02/28/2017
    Reference : FP7-GC-MATERIALS – project n°608931
    Project title : Advanced Materials for Batteries
    Target : “MAT4BAT builds-up its EVs battery strategy on advanced materials and pilot line processes, proposing three novel concepts of cells initiating from a state-of-the art combination of cell materials”
    Website :
    Contact : R. Lin (

  • INTERACT : Start : 09/01/2013  End : 02/28/2017
    Reference : FP7-ENERGY – project n°608535
    Project title : InnovaTive Enzymes and Poly(Ionic Liquids) Based Membranes as CO2 Capture Technology.
    Target : “The general concept of INTERACT is to open new pathways for development of high-potential novel processes for post combustion CO2 capture based on new materials, using poly(ionic liquid)s and/or enzymes, integrated into gas separation technologies such as gas separation membranes, absorption in columns and absorption using membrane contactors, resulting in process intensification”
    Site web:
    Contact : S. Loïs ( 

  • MARS-EV : Start : 10/01/2013 End : 09/30/2017
    Reference : FP7-GC-MATERIALS – project n°609201
    Project title : Materials for Ageing Resistant Li-ion High Energy Storage for the Electric Vehicle
    Target : “MARS-EV aims to overcome the ageing phenomenon in Li-ion cells by focusing on the development of high-energy electrode materials via sustainable scaled-up synthesis and safe electrolyte systems with improved cycle life”
    Website :
    Contact : R. Lin ( 

  • COLABATS : Start : 01/10/2013  End : 09/30/2016
    Reference : FP7-ENV – project n°609201
    Project title : Cobalt and Lanthanide Recovery from Batteries
    Target : “The COLABATS project will provide new industrial processes for the recycling of the critical metals Cobalt and Lanthanides and key economic metals Nickel and Lithium, from waste batteries, significantly improving recycling efficiencies and metal purity from existing recovery routes”
    Contact : S. Loïs (

  • EUROLIS : Start: 01/10/2012  End : 09/30/2016
    Reference : FP7-GC-MATERIALS – project n°314515
    Project title : Advanced European Lithium Sulphur Cells for Automotive Applications
    Target : “The aim of the project is to develop an advanced and sustainable lithium sulphur (Li-S) battery for automotive use”
    Site web:
    Contact : S. Fantini (

Eurostars Projects 

  • MIFLOW : Début: 01/04/2012 Fin : 31/03/2014
    Reference : EUROSTARS – project n°E!6805
    Project Title : Microwave Assisted Flow Reactor
    Target : “Miflow will develop a novel microwave assisted flow reactor to allow scale-up of reactions with minimum process development and giving significant energy savings. The reactor concept will be proved by testing with novel ionic liquid reactions tailored from a range of end-user specific processes ”
    Contact : S. Fantini (

ANR Projects

ISICAP : Start : 01/01/2013  End : 12/31/2015
   Reference : ANR-SIMI9 – project n°12-BS09-0032-01
   Project : In-situ Nanostructured Si-based Supercapacitors
   Target : “The ISICAP project aims to establish new concepts and architectures for on-chip supercapacitors”  Contact : R. Lin (